CP6909-0001-0000 by Beckhoff
Get a Quote for CP6909-0001-0000
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The CP6909-0001-0000 is a fanless Panel PC assembled by Beckhoff for the CP Panel PC Systems series. Designed as a front-mounted operator interface, it combines an industrial display, an integrated single-board computer, and field-ready I/O connectors to support visualization and machine control tasks directly on the production floor. By merging processing power with an integrated touchscreen, the unit eliminates the need for a separate HMI terminal and streamlines cabinet layouts in distributed automation systems.
The electronics are supplied from a regulated 24 VDC rail, and undervoltage is avoided as long as at least 22 V reaches the pluggable terminal. A field-replaceable fuse rated at 4 A guards the internal power path, while the circular power connector can safely carry up to 16 A to support inrush or auxiliary loads. The aluminum front panel is sealed to IP65, so washdown sprays or airborne particulates cannot reach the display or the capacitive keys. One DVI extension port sends a mirrored image to a remote monitor, and a single USB-B device socket enables service access without opening the enclosure. Two downstream USB-A ports provide connectivity for an operator keyboard or barcode scanner, and both use the USB 2.0 signaling rate.
The rear housing conforms to IP20, making it suitable for installation inside a protected cabinet where convection cooling is available. Field wiring lands on spring terminals that accept conductors up to 1.5 mm², accommodating common 16 AWG control cabling. The 7-inch panel employs a TFT active-matrix screen for consistent brightness across wide viewing angles, and user input is captured through a single-touch resistive sensor that responds to gloved hands. One additional USB extension header supports docking modules such as RFID readers. All USB channels use the Universal Serial Bus 2.0 protocol, simplifying the connection of compatible peripherals. The front-mounted format places the display and controls within reach while the rear connections remain protected inside the cabinet.
Technical Specifications
Display Sizes And Resolutions
5.7-inch (640 x 480) to 19-inch (1280 x 1024)
Display Type
TFT
Dvi Extended Input
1
Emc Emission
Conforms to EN 61000-6-4
Emc Immunity
Conforms to EN 61000-6-2
Front Protection
IP65
Front Protection Rating
IP65
Material
Sheet-steel housing with aluminum front
Max Fuse Rating
4 A
Max Wire Cross-section
1.5 mm²
Min Supply At Plug
22 V
Nominal Input Voltage
24 VDC
Permissible Ambient Temperature
0°C to +55°C
Permissible Relative Air Humidity
Maximum 95%, no condensation
Permissible Transport/storage Temperature
-25°C to +65°C
Power Connector Current
16 A
Power Supply Connection
5-pin voltage socket with strain relief housing
Rear Protection
IP20
Rear Protection Rating
IP20
Shock Resistance
5 G (~50 m/s²), duration: 30 ms
Supply Voltage
24 VDC
Touch Technology
Single-Touch
Usb Device Input
1
Usb Device Outputs
2
Usb Extended Input
1
Usb Standard
2.0
Vibration Resistance
10 to 58 Hz: 0.035 mm, 58 to 500 Hz: 0.5 G (~5 m/s²)
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







