CP6907-1002-0000 by Beckhoff

The CP6907-1002-0000 is a panel-mount industrial computer produced by Beckhoff within the CP Panel PC Systems series. As a compact HMI platform, the unit combines control processing with a touch display so machines or production lines can be supervised directly from an enclosure door or operator station. It can execute PLC tasks while presenting status graphics, alarms, and parameter pages to factory personnel. This combination reduces the need for separate control and visualization devices in space-constrained machine installations.

The front face integrates a TFT screen for full-color visualization, and the aluminum bezel has an IP65 protection rating that prevents dust and water from entering through the front. Electrical power is supplied from a regulated 24 VDC bus, and the electronics continue operating at voltages as low as 22 V to withstand brief voltage dips. With Beckhoff extension hardware, display and USB signals can be routed over distances of up to 50 m for decentralized mounting. Local USB-e ports support data transfer rates of up to 480 Mbit/s. The internal controller samples digital device data at a maximum DDC rate of 50 kHz, supporting rapid communication with connected equipment. Each USB line can extend up to 5 m without hubs, allowing keyboards, memory devices, and other compatible peripherals to be connected locally.

The rear housing has an IP20 protection rating because it is intended to remain inside a closed cabinet. It withstands mechanical shocks of up to 5 G that may occur on mobile or vibrating equipment. Supply wiring enters through a five-pin connector with a 16 A plug rating, while a 4 A fuse provides overcurrent protection for the PC power segment. Field cables with conductor sizes up to 1.5 mm² can be clamped securely, and the protective earth conductor must have a cross-sectional area of at least 4 mm² to meet grounding requirements. Reliable operation is maintained at relative humidity levels as high as 95%. These wiring and enclosure characteristics support installation in protected industrial control cabinets exposed to vibration and high ambient moisture.