CP6719-0001-0000 by Beckhoff

The CP6719-0001-0000 is a 19-inch panel PC manufactured by Beckhoff for the CP Panel PC Systems series. It integrates a display, computing logic, and field connectivity inside a single enclosure, allowing it to operate as both a human-machine interface and an industrial controller on factory floors. Its integrated architecture supports machine-mounted installations where display and control functions must remain close to production equipment.

The housing is cooled by a fanless heat sink arrangement that eliminates moving parts and reduces maintenance requirements. Visual output is routed through a DVI-I connector, enabling either digital or analog monitors to be attached for mirrored or remote viewing. Network traffic passes through two Gigabit ports that support 10/100/1000BASE-T signaling, so control data and plant-level IT traffic can be isolated on separate interfaces. The aluminum front panel provides IP65 protection, sealing the touchscreen against dust and low-pressure water jets. Internal electronics remain operational at temperatures up to +55 °C in control cabinets with limited airflow. One CFast slot provides solid-state mass storage, and a 2.5-inch bay accommodates a hard disk or solid-state drive for large recipe and log files. The 3.5-inch motherboard format keeps the component layout compact without compromising expandability, while the system withstands continuous vibration of up to 0.5 G on mobile or high-speed equipment.

Power is supplied at 24 VDC, allowing the panel to share a low-voltage rail with compatible sensors and actuators. The unit tolerates mechanical shocks of up to 5 G during transport or tool-change events. Four rear USB receptacles conform to the USB 2.0 standard and accommodate peripherals such as barcode scanners, memory sticks, and uninterruptible power supply links. The rear housing provides IP20 protection because it is normally installed within a cabinet, while the sealed front remains exposed for operator access. Relative humidity can reach 95% without condensation, supporting operation in facilities where moisture levels vary throughout production cycles.