CP6202-0011-0000 by Beckhoff

The CP6202-0011-0000 is an industrial panel PC manufactured by Beckhoff as part of the CP Panel PC Systems series. It combines control processing and visualization in a single housing so a machine builder can execute PLC logic and present operator data from one device, reducing cabinet hardware and wiring in automated cells and packaging lines.

A 15 in TFT display delivers clear status graphics, and its native 1024 × 768 resolution matches common SCADA screen layouts without scaling. For field connectivity the unit provides 2 Ethernet ports for segregated control and plant networks, while maintenance tools and removable media can be attached through 4 USB ports. The front face is sealed to IP65, allowing wash-down or dusty environments when the panel is flush-mounted. Overall front dimensions are 390.1 × 315.8 mm, and a 4 mm corner radius lets the bezel sit cleanly inside gasketed openings. An internal 2.5-inch drive bay accepts one solid-state or hard disk for the operating system, and the electronics are built on a 3.5-inch motherboard that balances I/O density with a shallow footprint. One RS-232 port is available for legacy serial devices.

Installation is simplified by a cabinet penetration of only 40 mm, and the panel seats in a cutout measuring 380 × 315 mm that matches most standard door layouts. Power is supplied at 24 V DC, so the system can be wired directly to common control-voltage buses without a separate converter. The aluminum front panel dissipates heat, while the rear section carries an IP20 rating to permit convection inside protected enclosures. Video cloning or extended desktop functions are possible through a dedicated 1 × DVI output, enabling a secondary monitor at operator stations or engineering desks.