AM8022-0D11-0000 by Beckhoff

The AM8022-0D11-0000 servo motor is manufactured by Beckhoff and belongs to the AM Synchronous Servo Motors series. As a standard member of the AM80xx sub-series, it delivers controlled torque and speed for positioning tasks in packaging equipment, pick-and-place stations, and general motion platforms within industrial automation cells.

Its electrical behavior is defined by the winding code D, which specifies the coil resistance and inductance chosen for medium inverter voltages and moderate current demand. A brake supply of 24 VDC powers the integrated release circuit, allowing the mechanical brake to engage or disengage without relying on the drive's main bus. The motor mounts via a 58 mm square flange that aligns with IEC servomotor patterns and supports direct coupling to gearheads or machine frames. Rotor inertia is held low, yet the holding system can clamp the shaft with 2 Nm of static torque, preventing axis drift when power is removed. Position feedback is provided through an OCT single-turn encoder, giving absolute angle information for closed-loop control on start-up.

Cable management and mechanical coupling are simplified by the rotatable angular connector or terminal box, which lets installers orient power and feedback leads without twisting conduits. The output end uses a smooth shaft so couplings or pulleys can be pressed on without keyways, reducing backlash in high-precision axes. A 24 V holding brake is factory fitted; combined with the 24 VDC supply mentioned earlier, it secures vertical or safety-critical axes during idle states. As part of the AM8xxx Synchronous Servomotors family, this AM80xx model shares common thermal behavior, and its overall length code 2 keeps the housing compact for enclosures with limited depth.