AM3033-0E01-0000 by Beckhoff

The AM3033-0E01-0000 synchronous servo motor is manufactured by Beckhoff and belongs to the AM80xx group within the AM Synchronous Servo Motors series. The device is a rotary actuator intended for precision positioning, velocity regulation, and cyclic indexing in automated machinery. By converting controlled stator current from a servo drive into smooth torque, it supports material handling axes, pick-and-place gantries, and compact packaging stations where quick response and repeatable accuracy are required. Its compact format makes it suitable for installations where motion performance must fit into limited machine space.

With a flange dimension of 72 mm and a length code of 3, the motor occupies minimal depth while retaining enough rotor diameter for effective heat dissipation. The electromagnetic circuit specified by winding code E produces a torque constant of 1.10 Nm/A, giving the drive a responsive current-to-torque relationship. An IP54 enclosure helps block dust and water splashes so the unit can be mounted close to active machine zones. Power and signal conductors terminate on a rotatable angular connector or in a terminal box, which allows flexible cable entry without forcing the harness into a sharp twist. The integrated parking brake is energized by 24 VDC and can clamp the shaft with 2 Nm to 3.5 Nm of static torque when the axis must remain in place.

For position feedback, the rotor is monitored by a two-pole resolver, which supplies rotor angle feedback to the servo drive during operation. Because the output end is a smooth shaft, there are no keyways or splines, which simplifies hub removal and helps preserve concentric running. The motor is supplied with a holding brake for stopped-axis retention, and the series type and version are both standard. It is intended for controlled axes that use closed-loop feedback and require secure load holding at a stop.